Procedure for resetting the admin password in NSMXpress
In order to reset the password, please use the following procedure:
Connect a console device to the console port of the NSMXPress appliance.
Physically power off the NSMXpress appliance.
Power the NSMXpress appliance back on.
During the boot sequence the console will display an option to "press any key to enter the menu". Hit any key. When the boot sequence is interrupted, a menu will display on the console. Choose "Rescue".
When the rescue process starts, it will ask about configuring the network connections. Choose "No".
A message will display indicating that the system is trying to find your Linux installation. Choose "Continue".
A message will display indicating that your system has been mounted under /mnt/sysimage. Press "Return".
Enter the command: vi /mnt/sysimage/etc/shadow
Find the line that starts with "admin:" The value between the first and second " : " is the password.
In the example below, the password is $1$MaGuoSOG$iEA4IiLSP26eM2e99LJiZ/
Using vi commands, remove the existing password value (i.e. $1$MaGuoSOG$iEA4IiLSP26eM2e99LJiZ/ ) with the following value.
This is the password value for "netscreen":
$1$KYPDZ8Eg$D627p0JrMaVMYqkdVRxcw
Using vi commands, save the file and exit.
At the command prompt, enter exit
The system will reboot and the admin password will be changed to netscreen
Showing posts with label nsm. Show all posts
Showing posts with label nsm. Show all posts
Friday, May 29, 2009
NSMXpress: reset to factory default
You want to put your NSMXpress Juniper Appliances into a factory default state.
This howto will show you how:
Connect a console device to the console port of the NSMXPress appliance.
Physically power off the NSMXpress appliance.
Power the NSMXpress appliance back on.
During the boot sequence the console will display an option to "press any key to enter the menu". Hit any key. When the boot sequence is interrupted, a menu will display on the console. Choose Re-Install
then at the password prompt choose: "erase".
That's it, the Juniper NSMXpress Management console will format the harddrive.
This howto will show you how:
Connect a console device to the console port of the NSMXPress appliance.
Physically power off the NSMXpress appliance.
Power the NSMXpress appliance back on.
During the boot sequence the console will display an option to "press any key to enter the menu". Hit any key. When the boot sequence is interrupted, a menu will display on the console. Choose Re-Install
then at the password prompt choose: "erase".
That's it, the Juniper NSMXpress Management console will format the harddrive.
Subscribe to:
Posts (Atom)